Cooling System Inspection

This is a visual inspection limited in scope by (but not restricted to) the following conditions: – Window and/or wall mounted air conditioning units are not inspected. – The cooling supply adequacy or distribution balance are not inspected. – Pressure tests on coolant systems are not within the scope of this inspection; therefore no representation is made regarding coolant charge or line integrity. – Judgment of system efficiency or capacity is not within the scope of this inspection. – Cooling systems are not dismantled in any way. Secured access covers are not removed. – The interior components of evaporators, condensers and heat pumps are not viewed. – The interior conditions of cooling components are not evaluated. – The presence of leaking refrigerant lines, heat pump oil, etc., is outside the scope of this inspection. Please also refer to the pre-inspection contract for a detailed explanation of the scope of this inspection.
[table_style color=”red”]

Inspected Item	Image
Air Conditioning Unit [greenbox] Condition: Satisfactory [/greenbox] Status: Tested Age: Capacity: 4 Ton Location: Exterior east Last Service Date:Problems: *The system was not inspected for low refrigerant.
Air Conditioning Type [yellowbox] Condition: Needs Maintenance [/yellowbox] Type: Central Air Fuel: Turned On
Electrical Disconnect [greenbox] Condition: Satisfactory [/greenbox] Location: Next to the unit
Air Distribution [greenbox] Condition: Satisfactory [/greenbox] Type: Ductwork Located in: Each Room